Top Fireplace Questions

Dated: December 29 2021

Views: 3

Top Fireplace Questions

 

Ready for the snap, crackle and pop of a roaring fire? Fireplaces are one of the most sought-after home features, but using one can be intimidating, and you’ve probably got questions. Here’s a quick guide to get you and your fire started this fall.

 

How do I use a wood-burning fireplace?

1. Get your chimney inspected

Safety is your first priority! Have your fireplace and chimney inspected by a licensed professional. This is something you should do every year, before the first fire of the season.

2. Prepare the fireplace

Clean out any old ashes with a broom (make sure they’re cool, of course). Check that the damper is open and working properly.

3. Gather and prep your wood

Use seasoned hardwood that has been split and dried for at least six months — preferably for a year. Seasoned hardwood logs should be dark and cracked at the ends, and they should make a hollow sound when knocked together. To construct a long-lasting fire, place a rolled-up ball of newspaper or fire started beneath the grates. Then lay pieces of narrow, finely split wood in a crisscross pattern on the grates, called kindling. Finish the stack by securely resting one to three dry logs over the kindling.

4. Prime the flue

This step heats the cold air inside the flue so you don’t get a backup of smoke. Before you light the fire, light a tightly rolled-up sheet of newspaper, and hold it toward the open damper. Keep it there for a minute or two until you see the smoke going up the chimney.

5. Light it up!

Now you’re ready to light your fire and enjoy. If the fire starts to go out, gently fan the flames with folded newspaper or use a poker to get the air flowing again. Add logs to the fire with tongs to provide more fuel. When the fire has gone out for the night, close the metal or glass doors before you go to bed.

 

Are fireplaces efficient?

It depends. Wood-burning fireplaces, for all their old-fashioned charm, are a wildly wasteful way to heat a house. Since heat rises upward, most of it escapes through the chimney, even when the fire has gone out for the night. Fireplaces located against an outside wall lose even more heat, since much of it is lost to the cold outdoor air.

Solution? Only use your wood-burning fireplace for special occasions. If you don’t plan on using your fireplace often, purchase an inflatable plug to add insulation.

Gas fireplaces are more efficient, and the newest models are realistic enough to make you forget that you don’t own any firewood. Switching to a gas insert is expensive, though, especially if you have to make changes to your chimney. If aesthetics are all that matter, use your fireplace to display lit candles.

 

Are fireplaces safe?

Fire is the very definition of unsafe, but that doesn’t mean you can’t safely enjoy your fireplace. You just have to maintain it and practice common sense:

  • Keep flammable materials and objects away from the fireplace, and store firewood well away from the house.

  • To keep embers from flying out and igniting your unread stack of magazines, use a mesh or metal screen when the fire is lit.

  • Before lighting the first fire of the season, inspect your extinguishers, test your smoke detectors and review your family’s evacuation routes.

  • Continue to test your smoke and carbon monoxide detectors monthly. Carbon monoxide is produced by both gas and wood-burning fireplaces, and it’s especially dangerous because it’s invisible, silent and odorless.

  • The glass doors, mesh screen and tools can be dangerously hot. If you have children, use a free-standing barrier to prevent burns.

  • Wood-burning fireplaces produce smoke that can irritate or even damage your lungs, even with a properly functioning chimney. To keep smoke from filling your house, ensure that the damper is open, your home is ventilated, and the chimney has been inspected and cleared of obstructions.

Why does my gas fireplace smell?

What you smell is an additive that’s been included in the propane to help you detect gas leaks. Vent-free gas fireplaces typically come with an oxygen depletion sensor that will shut off the flame if too much carbon monoxide is detected, and vented fireplaces pull fumes away from the house. These safety measures aren’t foolproof, however, so ensure that you have carbon monoxide detectors installed, and inspect them monthly by pressing the “Test” button.

 

How often should I clean my chimney?

A buildup of soot and creosote is more than unsightly: It can reduce airflow, cause smoke to back up and even create a fire risk. To avoid a chimney fire, have your fireplace and chimney inspected annually by a licensed professional. They will likely recommend a cleaning when the layer of residue is about 1/8 of an inch thick. To clean inside the fireplace, put on a dust mask, sweep out the ashes, and scrub the surfaces with a brush and dishwashing liquid.

Blog author image

Joni Smith

I have been with Halo Group Realty since January 2014. I received my Real Estate Certification through Collin County Community College with honors. I am also a Home Staging Specialist working in the....

Latest Blog Posts

Dream Home Checklist

Dream Home Checklist Pre-approved? Know what you can afford? That means it is time to start house hunting! The hunt for your dream home can stall quickly if you aren’t sure what your

Read More

15 Essential Items to Include in an Emergency Survival Kit

15 Essential Items to Include in an Emergency Survival Kit You can’t predict the future—or control the toll that a fire, hurricane, or flood takes on your home. But you can take

Read More

5 Mortgage Myths — DEBUNKED!

 5 Mortgage Myths — DEBUNKED!  MYTH: You must have a 20% down payment to buy a house. TRUTH: Different loans require different down payments—some as low as%

Read More

Top Fireplace Questions

Top Fireplace Questions Ready for the snap, crackle and pop of a roaring fire? Fireplaces are one of the most sought-after home features, but using one can be intimidating, and you’ve

Read More